TacT Audio M2150 User Manual download pdf (Page 15)

15Tact Audio

Front Panel Controls

ON/OFF

Use the “ON/OFF” switch to toggle between ON and OFF operation.

(Standby mode can be only selected only through the remote control)

Master volume

The master volume is controlled by turning the large volume wheel. The green num-

bers on the left side of the wheel will change as you turn the wheel - this is your

master volume level indicator. (The wheel sensitivity, maximum volume and other

settings can be found in the “OPT” menu.)

Mute

Use the “MUTE” button to mute or un-mute during playback. The master level indica-

tor will switch to “--” in Mute mode. You can still adjust the master volume while the

unit is in Mute mode - the master level indicator will briefly indicate the level, then

switch back to “--” mute indicator

Digital

input selector

Analog

input selector

Press the “DIGITAL” button to select the digital input. This is a toggle switch, and

pressing it multiple times will toggle through all of the five digital inputs. The selected

input will be displayed in the input display portion of the display screen.

Press the “ANALOG” button to select the ANALOG input. This is a toggle switch, and

pressing it multiple times will toggle through all of the three analog inputs. The

selected input will be displayed in the input display portion of the display screen.

NOTE: The optional ADC module is required for analog inputs.

The front panel controls on the 2150 amplifier will allow you to control all of the

amplifiers main features. All secondary options are controlled with menus using the

remote control or the supplied software. The exclusive “TacT wheel” is the master

volume control. (The wheel is only available on the M2150)

ON/OFF Switch

MuteMaster VolumeDigital Input Selector

Display

Analog Input Selector

Input Display

Volume Level

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 29 30

No comments

TacT Audio M2150 User Manual Page 15